Putino Building Materials Co., Ltd.

With the rapid development of our country's economy, some large buildings such as airports, supermarkets, subways, and parking lots have been developed in various places. It is obvious that traditional ceiling materials are used in the ceilings of these large buildings for decoration. There are many limitations, so the aluminum grille with simple construction and good ventilation effect has become one of the mainstream development products in the industry.
Pudinuo Building Materials Co., Ltd. was originally built in the 1990s and is located in the beautiful Panyu District of Guangzhou. The company covers an area of 10,000 square meters. It is a construction enterprise integrating Pudinuo sales. Its main products are: aluminum grilles, Aluminum ceiling, aluminum veneer, curtain wall and other ceilings. With its first-class equipment, excellent quality and excellent service, the company is highly praised and favored by consumers in Guangjing, and its products sell well at home and abroad.
&Plus&r is the main brand of Putino building materials. It pursues novel and unique style and excellent quality, and has passed international certification. At present, the main products of &PLUS are: aluminum veneer, aluminum honeycomb panel, aluminum square tube, aluminum grille, aluminum buckle, aluminum buckle plate, aluminum hanging piece and other ceiling products. It is the largest and most comprehensive aluminum ceiling manufacturer in the country. It is also the most historic manufacturer. Putino continues to pioneer and innovate. While improving product quality, it also introduces new products in terms of product shape, color, etc., strives for excellence, advocates the mainstream of modern life, faces the modern lifestyle, and creates a perfect art space for you. ,
Pudinuo has the longest and most authoritative spraying production line in the country, with a total length of meters. The process flow is:
, & Pre-treatment: remove oil, dust, and rust on the surface of the workpiece, and The surface of the workpiece forms a corrosion-resistant and can increase the adhesion of the sprayed coating & phosphating layer&r
, & electrostatic spraying, apply the powder coating evenly on the surface of the workpiece,
, & high-temperature curing, the surface of the workpiece will be The powder is heated to a specified temperature and held for a corresponding time to melt, level and solidify, thereby obtaining the desired surface effect of the workpiece.
, & Decoration treatment, the workpiece after electrostatic spraying can achieve a certain special appearance effect, such as various wood grains, patterns, luster, etc.
Types of aluminum grilles:
Square grille system, trough grille system, tower grille system, triangular grille system
Grille ceiling installation process and method:< br/>, & Determine the visual installation height, use an ink fountain to record the horizontal line on the wall
, & Use an iron expansion gun to fix the boom on the top, and fix the light steel keel below the boom to maintain the horizontal line
,&Use cement to set the aluminum corner lines along the horizontal line
,&Put the grille on the ground to assemble it completely
,&Put the assembled grille on the aluminum trimmed corner, and use The hanging piece is directly buckled on the light steel keel
Horizontal line: Use a level to find a horizontal point on each corner of the room. Pop up the level line and blindly follow the level line to measure to the design height of the ceiling. Use a pink line to record the level line along the wall. That is the horizontal line of the ceiling grid. At the same time, according to the ceiling plan, record the position of the main keel on the concrete roof. The main keel should be divided from the center of the ceiling to both sides, with a maximum spacing of The spacing &, if the fixed points of beams and pipes are larger than the design and specification requirements, the fixed points of the suspenders should be increased.
Fix the hanger: Use expansion screws to fix the hanger, and use a ￠ hanger. The hanger can use cold steel bars and coiled steel bars, but the coiled steel bars are used to straighten them mechanically. One end of the boom is the same **Corner code welding, the other end can be tapped to insert a screw rod that is larger than the size, or you can buy a finished screw rod and weld it. The made boom should be rust-proofed, and the boom should be fixed to the floor with an expansion screw. When drilling with an impact hammer, the hole diameter should be slightly larger than the diameter of the screw.
Grille installation: hook the pre-installed grille into the main bone hole with a hanging piece and lift it. After connecting the entire grille, adjust it to the level.